3/8" PVC Fitting?

[DarkSoul]

do they exist?

I need two 3/8" MPT x 1/2 SLIP PVC fittings.

does anyone know where I might find 2 of these things? do they exist?

[THEJRC]

have a gander at pvcfittings.com, they typically can get anything.

http://pvcfittings.com/

[Rbishop]

A larger hardware store that has a big plumbing section that may help. Especially in the sink plumbing area.

[Derringer]

It would be best to find just one part, but you might have to rig something up - use 2 connectors to achieve what you want.

Possibly use a 3/8" MPT x 3/4" MPT then connect the 3/4" FPT x 1/2" slip ...

I looked at every hardware store in town for a 5/8" size fitting and couldnt find it - everything was in even 1/4" increments starting at 1/2" ...

Good Luck.

[DarkSoul]

It would be best to find just one part, but you might have to rig something up - use 2 connectors to achieve what you want.

Possibly use a 3/8" MPT x 3/4" MPT then connect the 3/4" FPT x 1/2" slip ...

I looked at every hardware store in town for a 5/8" size fitting and couldnt find it - everything was in even 1/4" increments starting at 1/2" ...

Good Luck.

Well, i wouldnt want to go as large as 3/4", this is only for my filter intakes, I need to tee them together in a small space. so using too many pieces together will prevent my door from closing :)

i basically have room for only these 2 connectors, a tee, and the small pieces of PVC needed to connect them.

.... light bulb..... I could probably use a john guest fitting for this.
im pretty sure ive seen one just this size.

[jamthoyoung]

I have had trouble finding unusual sizes at the Home Depot size stores. You might try your luck at a local plumbing supply store.