There are so many tricks and mods out there like sticking a thermometer inside to see the temperature while filling. What tricks have you got! Show a picture if you can.
Q
Q
How do you use and mod your Python?
- Thread starter Que
- Start date
i extended mine by 30 feet by adding another tube. also just toss the thermometer into the tube. its the digital one where i suction cup it to the tube.
drain the tank, wrap up python and put away.
Flip the valve under my sink to refill the tank with 22C water everytime.
Flip the valve under my sink to refill the tank with 22C water everytime.
THEJRC
Third String Messiah?
oooh I wanna see this spray bar attachment mod! now that's a brilliant idea, I may do the same for my Rena
another thing to do to keep the connection at the tap tight, before you attatch it to the tap, screw the brass adater into the swivel piece tightly, and then turn the swivel piece until it starts spinning on its own ("breaks away" from the brass piece) this will ensure that the venturi is screwd on tight before each use.
I lack the allen wrench large enough to tighten this adapter, so this is what I do.
I lack the allen wrench large enough to tighten this adapter, so this is what I do.
i let the gravel vac fill completely with water, and the added weight of it holds it in the tank so i can sit and monitor temp and my fish.
I cut off my gravel vac and turned it into a CO2 reactor, LOL. 
This is what the end of my python looks like now.
And this is where the gravel vac ended up in.
This is what the end of my python looks like now.
And this is where the gravel vac ended up in.