Structural issues with weight?

NewObsession

AC Members
Aug 27, 2007
575
0
16
56
So, I had been thinking about building an aquarium. My g/f's under is in the glass business so I figured I could save some $$. Was planning something in the 55-60 gallon range. To make a long story short, when I called him about the glass, he asked if I wanted to go bigger because he had a tank in his basement that he got a few years ago and lost interest. He thinks it's roughly 6ft x 18"deep by 30-36" tall. He also has the cover w/ lights and thinks he still has the filter. He said if we could get some help moving it and a truck to get it out of his place we could have it!

Now, if I've calculated right, I think it is in the 150 gallon range. My concern is that if it goes in the bedroom where I was planning, do I need to worry about the floor collapsing? I know it seems silly.. but I also know its a lot of weight. That section of the house is also over a store so there are no load bearing walls or anything under it.. Anyone know how mcuh weight we would be looking at and thoughts on the structural issues?
 
Well lets see 150g tank
8lbs per gallon of water = 1200lbs
+ 150lbs of Substrate = 1350lbs
+ stand, glass & other stuff = 1800lbs or there abouts.

I am happy I live in a basement appartment with concrete floors.
 
I have a 100g tank in a 2nd story apartment but I made sure to line it on a load bearing wall perpendicular to the floor beams. From all the sites I read when I googled aquarium upstairs they say anything 55g or smaller should be fine anywhere, anything bigger should be near the load bearing wall perpendicular to the beams. Id say read up on it but I know I would feel uneasy if I wasnt on a load bearing wall.
 
AquariaCentral.com