how to get this going....new tank.

[im_a_tidyman]

im thinking about buying this tank, its not too different in size to my current tank, but has a sump, which i really want. Plus my tank is pretty scratched.

http://www.aquarist-classifieds.co.uk/php/detail59_97820.php

how will i get that sump up and running, what quip would i need?

[Reefscape]

Well...the tank is drilled which is a good thing..You will need...

Two bulk heads to match the holes drilled - Bulkheads (http://www.fishfurfeather.com/rigid-pipe-and-fittings-bulkheads-c-1_120_121_127.html)
Some 90 and 45 degree bends - Bends (http://www.fishfurfeather.com/rigid-pipe-and-fittings-elbows-c-1_120_121_128.html)
Solvent - Glue (http://www.fishfurfeather.com/rigid-pipe-and-fittings-miscellaneous-c-1_120_121_133.html)
Pipe work to match bulkheads - Pipe (http://www.fishfurfeather.com/rigid-pipe-and-fittings-pipes-and-clips-c-1_120_121_136.html)
Return Pump ( will need to match overflow rate. A 1 inch over flow is about 600 gph - Pump (http://www.fishfurfeather.com/pumps-aquarium-c-1_37_28.html)

Thats about your lot for the plumbing side of it. The linked items above are mearly an example, however, its a firm i have used a lot, and they are very reliable..

[im_a_tidyman]

great,!! many thanks

[im_a_tidyman]

now wot do i do with it hahaha

[Reefscape]

LOL....glue it all together, make a bridge, a car...whatever takes your fancy ;)













Seriously, it does take a little planning on paper, work out what bends you need, how much pipe work etc etc....