View Full Version : Bubble Tip VS Korallia
snailrider
12-10-2008, 7:08 PM
Guess who won.
I was at the lfs and was looking around and we found this guy stuck in a korallia. They gave me the anemone so I figure since I'm horrible with anemone's and such, why not try again, at least if it dies it wasn't my fault.
So this gal whom I shall name Kori, is really mangled. She was pulled through the grating of the powerhead, and would not pull off, I had to use a scissors and cut the thing loose. Put into a bag and brought home.
I acclimated to my new tank for about a half hour, and just set it right there (as in photo). Flow is real low, light is very poor. Looks like she attached to the rock already and I do see some contractions, very slight. A small amount of green on the few tentacles that seem intact.
So I am thinking to just let it sleep off, so to speak.
Any special needs for a severely traumatized bubbletip?
http://concreef.com/images/bubbletip-mangled.jpg
Kori and I thank you for your help. :)
Nothing really special you have to do.. just hope it makes it. One recommendation is to run carbon on your system if your not already to remove anything bad that the anemone may release from its wounds.
Unfortunately I have seen that happen all to often with anemones/koralias
snailrider
12-10-2008, 7:25 PM
Thanks Ace, How will lighting affect a mangled anemone? Is it better to keep low or higher, it was in a tank with metal halides, but the tank was rather tall, and now Kori is about six inches off the lights, 18 watt life glo I think.
And what and when to feed it. I don't think it has a mouth anymore.
Well it's lights out soon, so who knows what I will wake up to. I have no idea how long it was in the power head, but it wasn't completely jello.
What are the odds of survival?
If there is no mouth at all, ummm, sorry to say chances of survival are slim to none. Under 18w of light that is low light to begin with so I would put it at the very top. I would attempt to feed it if it inflates. I used to feed my anemone a cube of food a day, where it be brine, mysis, or whatever else I had in cube form.. probably not the best thing to do sticking a frozen cube on an anemone but I never noticed any ill effects from doing so. The anemone would grab onto the food with a tentacle and pull it into its mouth. Silversides are also a common thing to feed anemones. I had mine for 5 years before I gave it away, and 2 years later it is still happy with the maroon clown I gave away with it in a nice 220G tank with a solaris I series light.
Good luck!
snailrider
12-10-2008, 7:47 PM
I have no idea how much if any mouth is available. I guess tomorrow I will get the frozen brine and offer some.
Since it is in a 20 gallon, looks like if it survives alot of water changes will be in order.
I saw some youtube vids of bubble tips being cut in half, how do those eat? Well, anyway I think if it will survive, I will have to plan on putting it in the reef tank that is not set up yet.
Thanks for the info.
When people forcefully frag an anemone they do so just like a mushroom. Either cut it directly in half so a piece of the mouth is on both, or to the extreme, cut them up like a pizza.. you just have to have a small piece of the mouth left and it will regrow. I have never been brave enough myself to frag an anemone, but some people can do it.
snailrider
12-10-2008, 8:21 PM
I was queezy just cutting it loose from the power head.
But then maybe it will survive. I hope so, been thinking about anemone for the clowns.
snailrider
12-10-2008, 11:09 PM
Checked on it after lights out, it does not look good at all. :(
snailrider
12-11-2008, 11:41 PM
OK last night after lights out, it totally deflated and I thought it died.
This morning I offered brine shrimp and it seemed to take it, but who knows what it did with it. It is in real sad shape.
Tonight after lights out it looks like this, Totally inflated looks like it will burst.
snailrider
12-11-2008, 11:44 PM
this photo was last night after lights out. It has been on the move also.
weylin
12-12-2008, 11:20 AM
Thats good news.. Hope he makes it...
snailrider
12-12-2008, 3:47 PM
The noon update. Looks like half of him may die off, and the part with tentacles still looks OK at best. I just don't see a mouth etc. The part that now appears to be deflated and withering, seems to be the part with internal organs.
I thought about separating the pieces with a scissors, but if the tentacle side is still relying on the other side, I could deliver the final blow. If it is separating on its own, fine.
This is what Kori looks like this afternoon.
snailrider
12-14-2008, 10:19 AM
another update, sure don't look good.
I'm just wondering if that is the intestines so to speak. I think Kori is inside out.
Ace25
12-14-2008, 12:15 PM
Ouch, sure doesn't look good.. but the fact it is still inflated gives a little hope.
snailrider
12-14-2008, 3:46 PM
Well she inflates and deflates and moves with different light, and the tips are still lime green, faint but not totally bleached.
This will be an interesting project for sure. I sure would feel better if I could find the mouth or some way to feed it for sure.
It seems to be working towards the front of the tank where natural light comes from.
My 55 is right in the window next to this tank, and my maroon clowns live there. Wondering if it would help Anemone "Kori" to have some clowns around, or if the clowns would disturb it during the healing process.
I think if the BT is still alive next weekend, I will move her in with the clowns.
snailrider
12-17-2008, 10:48 AM
update, Kori not looking real good as of late. I'm now thinking it will not make it.
Now is about timing I guess, if it dies, it can really mess the tank, but if there is a chance of survival yet, I don't want to remove it.
weylin
12-20-2008, 1:41 PM
Did it make it..?
snailrider
12-20-2008, 2:03 PM
Did it make it..?
Nope, yesterday it went down the freshwater tube ride.
It couldn't eat, just too mangled. It couldn't heal either. I hope I learned a little about anemone's by giving it a try at least. Let's just say Kori donated its life to science. RIP