Fresh250
06-15-2009, 12:34 PM
Im working on putting together a diy co2 setup to save some green.
i have some parts planned out and still feel that im forgetting something.... take a look and any advice is welcome.
ill use a 5lb aluminum cylinder
this bubble counter:
http://cgi.ebay.com/JBJ-CO2-Bubble-Counter-Aquarium-Diffuser-Regulator_W0QQitemZ250306187549QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item3a4769511d&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A0|293%3A1|294%3A30 (http://cgi.ebay.com/JBJ-CO2-Bubble-Counter-Aquarium-Diffuser-Regulator_W0QQitemZ250306187549QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item3a4769511d&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A0%7C293%3A1%7C294%3A30)
this needle valve/regulator:
http://cgi.ebay.com/CO2-Needle-Valve-Regulator-pH-Pressure-Diffuser-Tank_W0QQitemZ250306190397QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item3a47695c3d&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A0|293%3A1|294%3A30 (http://cgi.ebay.com/CO2-Needle-Valve-Regulator-pH-Pressure-Diffuser-Tank_W0QQitemZ250306190397QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item3a47695c3d&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A0%7C293%3A1%7C294%3A30)
i have a check valve, tubing and powerhead to use venturi method when its set up.
i dont know much about using a reactor any info on this??????
thanks guys
i have some parts planned out and still feel that im forgetting something.... take a look and any advice is welcome.
ill use a 5lb aluminum cylinder
this bubble counter:
http://cgi.ebay.com/JBJ-CO2-Bubble-Counter-Aquarium-Diffuser-Regulator_W0QQitemZ250306187549QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item3a4769511d&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A0|293%3A1|294%3A30 (http://cgi.ebay.com/JBJ-CO2-Bubble-Counter-Aquarium-Diffuser-Regulator_W0QQitemZ250306187549QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item3a4769511d&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A0%7C293%3A1%7C294%3A30)
this needle valve/regulator:
http://cgi.ebay.com/CO2-Needle-Valve-Regulator-pH-Pressure-Diffuser-Tank_W0QQitemZ250306190397QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item3a47695c3d&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A0|293%3A1|294%3A30 (http://cgi.ebay.com/CO2-Needle-Valve-Regulator-pH-Pressure-Diffuser-Tank_W0QQitemZ250306190397QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item3a47695c3d&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A0%7C293%3A1%7C294%3A30)
i have a check valve, tubing and powerhead to use venturi method when its set up.
i dont know much about using a reactor any info on this??????
thanks guys