I have two Durso Standpipes I made for my 180g tank, I decided to use a closed loop so I no longer need them. They are brand new and were only installed in the tank to test fit, never used.
They are 1-1/4" Sch. 40 PVC. Caps are pre-drilled, everything is glued except the cap and where the long pipe inserts into the Tee. They are made to fit into a 1" bulkhead and on a 24" deep tank will give a 2-3" water drop in the overflow. They are not glued to the Tee, so they can be cut for a shorter tank.
Asking $20 plus shipping for the pair.
Email kwells@huntel.net
Thanks.
They are 1-1/4" Sch. 40 PVC. Caps are pre-drilled, everything is glued except the cap and where the long pipe inserts into the Tee. They are made to fit into a 1" bulkhead and on a 24" deep tank will give a 2-3" water drop in the overflow. They are not glued to the Tee, so they can be cut for a shorter tank.
Asking $20 plus shipping for the pair.
Email kwells@huntel.net
Thanks.
