Petsmart - looking for all glass hood
- Thread starter wrc1045
- Start date
you mean a canopy or hood?
These are the canopys...
http://www.all-glass.com/products/hoods/index.html
plus I think the have a store locator on thier site, on the main page at the lower right hand corner it says enter your area code. HTH
These are the canopys...
http://www.all-glass.com/products/hoods/index.html
plus I think the have a store locator on thier site, on the main page at the lower right hand corner it says enter your area code. HTH
I am looking to replace the existing (it's just a little dirty and I wish to replace it) ------- the actual glass that covers the water, is that the hood?
I have a canopy (the thing that covers the lighting, filters, misc) <- is that the canopy. please forgive me on the terms
I have a canopy (the thing that covers the lighting, filters, misc) <- is that the canopy. please forgive me on the terms
http://www.drsfostersmith.com/Produ...ll&Ntx=mode+matchallpartial&Np=1&N=2004&Nty=1
That's the link for the twin tube sized All-Glass Versa Tops...the regular ones won't be wide enough to accommodate the twin tube fixtures you have. They don't charge extra for shipping there either. Use coupon code 1130/8421 for $8 off a $50 order.
That's the link for the twin tube sized All-Glass Versa Tops...the regular ones won't be wide enough to accommodate the twin tube fixtures you have. They don't charge extra for shipping there either. Use coupon code 1130/8421 for $8 off a $50 order.
You can buy the hinges and back plastic cutout edge online through the various etailers...... Measure the tank once you have the hinge, accounting for how far the glass inserts into the hinge, and the width of the back plastic cut out thingy.... go down to the local glass shop ans have them cut you the two pieces...
You can get 1/8 and 3/16 inch capacity hinges.... that denotes the thickness of the glass you can use with them.
Cheaper than buying the complete hood from all-glass if you ask me.
You can get 1/8 and 3/16 inch capacity hinges.... that denotes the thickness of the glass you can use with them.
Cheaper than buying the complete hood from all-glass if you ask me.