I'm looking to sell my DIY custom made LED setup. I built this lighting before finishing a custom tank I was working on over the winter. Needless to say, the tank is not completed yet, its summer. And its time to finish my other project, my truck. So the money I recoup from these, will be going towards my other project.
I'm new to the forum, can give references for past sales on other forums and ebay if necessary.
I purchase all items for this setup from steves leds online. Had them soldered professionally local. Have not been used on a tank.
Set up consists of
-46x Philips Luxeon ES 3W leds. These are top of the line leds, in the realm of cree. Some would say better.
26x Cool White - http://shop.stevesleds.com/Philips-Luxeon-ES-COOL-WHITE-3-Watt-LEDs-Luxeon-ES-white.htm
12x Royal Blue - http://shop.stevesleds.com/Philips-Luxeon-ES-ROYAL-BLUE-3-Watt-LEDs-Luxeon-ES-Royal-Blue.htm
8x Cyan - http://shop.stevesleds.com/Philips-Luxeon-ES-Cyan-3-Watt-LEDs-Luxeon-ES-Cyan.htm
-These are mounted on 2x 60" square heatsinks (aircraft grade aluminum) arrays. With pressurized cooling fans. 23 Leds per array.
http://shop.stevesleds.com/Aluminum-Heatsink-tubing-T6063-1-1-4-Bare-Heatsink-Tubing.htm
http://shop.stevesleds.com/Pressuri...Regulator-Pressurizing-Cooling-Fan-w-plug.htm
- The drivers for these are as follows - There are mounted with dimmers and individual toggle switches for power on off.
2x Steves Dimmable Double Driver (One driver for Royal Blues, One Driver for Cyan)
http://shop.stevesleds.com/The-Double-Dimming-LED-Driver-Double-Driver.htm
1x Steves Dimmable Triple Driver (for Cool Whites)
http://shop.stevesleds.com/The-Quad-Dimming-LED-Driver-Quad-Driver.htm
-Power Supply as follows
1x http://shop.stevesleds.com/Switching-Power-Supply-200w-25-83A-S-201-Switching-Power-Supply.htm
All LEDS have been affixed to heatsink with the following. Which is semi-permanent. High Quality Thermal Adhesive.
http://shop.stevesleds.com/Thermal-Adhesive-1-Part-Glue-TSE3941M-Thermal-Adhesive.htm
I have mounted a splash guard using lexan. This is functional, but NOT PERFECT aesthetically. Its a DIY!
I can provide more/better pictures and or video if a serious buyer is interested. Just uncovering these at the moment.
Subtotal for the items bare required for this setup well exceeds $450+ not including labor and others, and in return the quality of $1000.00 plus setups.
Will sell for $400 shipped. PayPal Only. Must send as gift or add 3%. Own a setup no one else has. Can answer any questions.
Enjoy and thanks for looking!
I'm new to the forum, can give references for past sales on other forums and ebay if necessary.
I purchase all items for this setup from steves leds online. Had them soldered professionally local. Have not been used on a tank.
Set up consists of
-46x Philips Luxeon ES 3W leds. These are top of the line leds, in the realm of cree. Some would say better.
26x Cool White - http://shop.stevesleds.com/Philips-Luxeon-ES-COOL-WHITE-3-Watt-LEDs-Luxeon-ES-white.htm
12x Royal Blue - http://shop.stevesleds.com/Philips-Luxeon-ES-ROYAL-BLUE-3-Watt-LEDs-Luxeon-ES-Royal-Blue.htm
8x Cyan - http://shop.stevesleds.com/Philips-Luxeon-ES-Cyan-3-Watt-LEDs-Luxeon-ES-Cyan.htm
-These are mounted on 2x 60" square heatsinks (aircraft grade aluminum) arrays. With pressurized cooling fans. 23 Leds per array.
http://shop.stevesleds.com/Aluminum-Heatsink-tubing-T6063-1-1-4-Bare-Heatsink-Tubing.htm
http://shop.stevesleds.com/Pressuri...Regulator-Pressurizing-Cooling-Fan-w-plug.htm
- The drivers for these are as follows - There are mounted with dimmers and individual toggle switches for power on off.
2x Steves Dimmable Double Driver (One driver for Royal Blues, One Driver for Cyan)
http://shop.stevesleds.com/The-Double-Dimming-LED-Driver-Double-Driver.htm
1x Steves Dimmable Triple Driver (for Cool Whites)
http://shop.stevesleds.com/The-Quad-Dimming-LED-Driver-Quad-Driver.htm
-Power Supply as follows
1x http://shop.stevesleds.com/Switching-Power-Supply-200w-25-83A-S-201-Switching-Power-Supply.htm
All LEDS have been affixed to heatsink with the following. Which is semi-permanent. High Quality Thermal Adhesive.
http://shop.stevesleds.com/Thermal-Adhesive-1-Part-Glue-TSE3941M-Thermal-Adhesive.htm
I have mounted a splash guard using lexan. This is functional, but NOT PERFECT aesthetically. Its a DIY!
I can provide more/better pictures and or video if a serious buyer is interested. Just uncovering these at the moment.
Subtotal for the items bare required for this setup well exceeds $450+ not including labor and others, and in return the quality of $1000.00 plus setups.
Will sell for $400 shipped. PayPal Only. Must send as gift or add 3%. Own a setup no one else has. Can answer any questions.
Enjoy and thanks for looking!
