I was in the process of planning for and auto top off system and a semi automated water change system when I came up with this idea that will combine both. The tank is a 55g that I just set up with HOB filtration for now. I would start with a brute trash can full of conditioned water with a small pump inside. The pump would be on a timer set to run say 2min a day. For this example we will say that provides 3g to the tank. I would then have an overflow on the tank that runs to a drain. For example: Pump in 3g make up for a couple cups of evaporation and the difference is wasted out the over flow providing roughly a 5% water change. I then just refill the brute and prime weekly. I could add a heater to the water storage if needed but I don't think It will effect the tank temp considering the relatively small amount being exchanged.
Thought? Am I missing anything? Would this eliminate the need for larger water changes?
My setup is in may basement and I have a floor drain so and Overflow really wouldn't be the end of the world.
Thanks,
Wes
Thought? Am I missing anything? Would this eliminate the need for larger water changes?
My setup is in may basement and I have a floor drain so and Overflow really wouldn't be the end of the world.
Thanks,
Wes