http://www.monsterfishkeepers.com/forums/forumdisplay.php?f=30
Theres a TON there, alot are step by step pictures
150 wood and glass tank build thread
- Thread starter scootrnerd
- Start date
Theres a TON there, alot are step by step pictures
glassi is in! and i am bleeding !
looks like a few days of good weather so i installed the glass today i bought black silicone and it came out white ,whatever. i will do the outside in black. i have some run over on the viewable part of the glass i will clean it of later. glass is sharp BTW!
looks like a few days of good weather so i installed the glass today i bought black silicone and it came out white ,whatever. i will do the outside in black. i have some run over on the viewable part of the glass i will clean it of later. glass is sharp BTW!
i cleaned off the white silicone from the front and did it in black now i am going to let it cure i think a week should do. still not sure on pumps though any recommendations? dont forget i am on a budget here :wall:
A 150 I'd have a minimum of a 1200 gph overflow to a sump with a compariable return pump. But with a tank that large you might even want to go 1800 or 2400 gph. But again its going to depend on your plans for the tank ultimately.
well it was late and i wasn't going back to the freaking store ok, lol
and that is no joke the tubes said black and it came out white. now it starting to turn clear i dunno. as long as it holds i don't really care as it wont be seen anyway
hey hoe H20
i filled it with water tonight and its HOLDING!!!!:headbang2: i am going to let it sit with water for a few weeks just to make sure:grinyes: all those smudges on the glass are extra silicone . i will clean them off later
i filled it with water tonight and its HOLDING!!!!:headbang2: i am going to let it sit with water for a few weeks just to make sure:grinyes: all those smudges on the glass are extra silicone . i will clean them off later
