150 wood and glass tank build thread
- Thread starter scootrnerd
- Start date
Does anyone know where i can get hardener for fiberglass resin at? i have looked almost everywhere. and all they sell is the kits.
Or Advance Auto Parts, in the body repair aisle, Depending on where you live, the idiots behind the counter may have no idea what you are talking about.
the fiberglass was just the fabric i didn't use any resin i just soaked it with the epoxy paint.
bulkheads!
i got the bulkheads in the mail today for the closed loop and the overflows with shipping they where 34.00 six half inch and three 1 inch i am to tired and its to late to try and drill any holes tonight. so it will have to wait. i still have to drain the tank anyway
(still holding just fine):headbang2:
i got the bulkheads in the mail today for the closed loop and the overflows with shipping they where 34.00 six half inch and three 1 inch i am to tired and its to late to try and drill any holes tonight. so it will have to wait. i still have to drain the tank anyway
(still holding just fine):headbang2:
disaster strikes!
i drained the tank today so i could start measuring for all the bulkheads. after draining it i flipped it on its side and found that the wood on the bottom was soaked with water. not sure what i am going to do just yet.
i drained the tank today so i could start measuring for all the bulkheads. after draining it i flipped it on its side and found that the wood on the bottom was soaked with water. not sure what i am going to do just yet.
