Level and bubbles look better. Next thing, turn down your skimmer just a tad on the dial. You want the bubbles/foam to stop about 1/2 way up the collection cup neck. It will still get the gunk out of the water, as the gunk builds up the bubbles become stronger and makes them foam over the top every once and a while. That is how you get the stuff in the cup to be darker and not water looking like your first pic.
As for the film.. some of it is skimmer, some of it is due to low flow in the sump (which is a good thing most of the time, but you need to have something to break up the water surface). I had to put a koralia3 in my sump to get the water/surface moving around because I was getting that same film.
As for the film.. some of it is skimmer, some of it is due to low flow in the sump (which is a good thing most of the time, but you need to have something to break up the water surface). I had to put a koralia3 in my sump to get the water/surface moving around because I was getting that same film.


