I have a Jbl.Never bothered trying Diy.Looks like you have everything you need.The built in needle valve will control how many bubbles per second to want to run.Rather than running the co2 through a reactor and cannister filter You have a ceramic diffusser which will break the co2 bubbles up this will work good.If you go larger tank might have to upgrade.
When I run it I have a timer in the wall plugged into a seperate power bar.The solenoid and lights turn off and on together with the timer.You will be starting out with low bubbles per second ,Don`t worry if people tell you the needle valve is not high enough quality bla bla bla.Take it slow it will work out.
When I run it I have a timer in the wall plugged into a seperate power bar.The solenoid and lights turn off and on together with the timer.You will be starting out with low bubbles per second ,Don`t worry if people tell you the needle valve is not high enough quality bla bla bla.Take it slow it will work out.
