When I bought my aquarium (about 2 weeks ago), I did so in a kit form. I bought a 29 gallon tank which came with a Tetra brand, Whisper, filter. I'm looking through the paperwork now and nowhere does it specify which model of filter it is, everything is roped together. Example being that the set-up guide is for a Whisper EX Advanced Filtration System; Models 20,30,45,70. I haven't hooked up the heater yet because all I have in there are cory cats (although I did have one fatality in the beginning) and I had an opaline gourami, but he didn't look good yesterday, and I found him dead this morning.
Question number 1, could these deaths be because of the water temperature? It's currently (about) 75 degrees farenheit.
The filter seems abnormally powerful. Both the cats and gourami have considerable trouble making it through the current. They seem to stray from that side of the tank merely because they can't swim anywhere near it, could this have put stress on them? Is the fact that I have about an inch and a half of space between the top of the water line and the bottom of the tank rim the problem, should there be more water to lessen the current? The current bothers me, whether it stresses the fish out too much or not, but the filter doesn't have settings, I have no idea how I'd fix this.
Question number 2, is the filter stressing out my fish? How do I lessen the force?
Thanks in advance, everyone!
Question number 1, could these deaths be because of the water temperature? It's currently (about) 75 degrees farenheit.
The filter seems abnormally powerful. Both the cats and gourami have considerable trouble making it through the current. They seem to stray from that side of the tank merely because they can't swim anywhere near it, could this have put stress on them? Is the fact that I have about an inch and a half of space between the top of the water line and the bottom of the tank rim the problem, should there be more water to lessen the current? The current bothers me, whether it stresses the fish out too much or not, but the filter doesn't have settings, I have no idea how I'd fix this.
Question number 2, is the filter stressing out my fish? How do I lessen the force?
Thanks in advance, everyone!