hi from prissy!sometimes the printing acts up,but i,ll try to post this.i have 50gal.allglass tank.a little trouble getting ac300 to go on it but made it. hope i dont have to much current,i,m running it closed up as much asi can.what does every one think?thank you prissy
new tank specs and question
- Thread starter prissy
- Start date
If you feel you're getting too much current, cut a piece of an AC300 sponge to fit completely over the intake tube. That will decrease the flow a bit.
too much filtration on 50gal?
morleyz:thank you for tip on filtration.sponge on filter intake. will not cut my capacity to filter too much?i do have a lot of current,tank is only 18"deep.thanks prissy.correction tank is 18"deep not 20"
morleyz:thank you for tip on filtration.sponge on filter intake. will not cut my capacity to filter too much?i do have a lot of current,tank is only 18"deep.thanks prissy.correction tank is 18"deep not 20"
Last edited:
I have an AC200 on a 35 gallon (about 18" deep) and there isn't that much current really. I don't think you want to slow the 300 too much unless your tank will be light-moderately stocked. If you plan on putting a lot of fish in I would suggest running at full capacity or possibly adding another filter.