I have a 120 Gal tank running for about a year now the PH was steady at 6.8 - 7.0, but recently my PH began dropping to low levels.
Here are my current readings:
ppm (mg/L)
NO3 = 20
NO2 = 0
GH = 150
KH = 40
pH = 6.0 or possibly lower
I have added a new Lava rock. I have two PowerHead 301 without a undergravel filter. I have the flow of water pointed up to make ripples in the water to increase oxygen levels. I have an Emperor 400 and a AquaClear 110 Power Filter. I recently changed the sponge media in the AquaClear and also switched from the white ammonia stage 2 media to activated carbon. I change my Emperor carbon filters monthly and do a 25% water change every two weeks. I have 3/4 inch gravel in the bottom I clean Bi-weekly with water change. I purchased a pH test kit to double check my readings and it confirms my findings. I tried raising it with PH up one time and the pH raised, but after a few days returned to 6.0. I read to try crushed coral or limestone, but I want to diag the cause. Any help is appreciated.
Here are my current readings:
ppm (mg/L)
NO3 = 20
NO2 = 0
GH = 150
KH = 40
pH = 6.0 or possibly lower
I have added a new Lava rock. I have two PowerHead 301 without a undergravel filter. I have the flow of water pointed up to make ripples in the water to increase oxygen levels. I have an Emperor 400 and a AquaClear 110 Power Filter. I recently changed the sponge media in the AquaClear and also switched from the white ammonia stage 2 media to activated carbon. I change my Emperor carbon filters monthly and do a 25% water change every two weeks. I have 3/4 inch gravel in the bottom I clean Bi-weekly with water change. I purchased a pH test kit to double check my readings and it confirms my findings. I tried raising it with PH up one time and the pH raised, but after a few days returned to 6.0. I read to try crushed coral or limestone, but I want to diag the cause. Any help is appreciated.