I use a JBJ 6' siphon ($16.50 at petco) vac with claw to clean & empty for W/C into a 5gal bucket for my 72gal BF. but I take off the claw tube attachment & just use the end of tube (1/2") to vac up the heavier debris - more siphon power & quicker.
then bought faucet adapter, 25' potable water hose from lowe's & a turn off valve. am able to fill direct from faucet at same or a bit warmer temps. then I use Prime.
problem I have with python or lee's is the faucet must be turned on to create pressure to suck out the water.
but using JBJ is perfect for vac & taking water out & then DIY your own hose system to connect to the nearest sink for fill up.
but if you want the python I found ken's to be the best prices for most of his products & doesn't kill you on shipping (so worth it to buy more stuff needed from ken's wide product selection)
http://www.kensfish.com/waterchangers.html
then bought faucet adapter, 25' potable water hose from lowe's & a turn off valve. am able to fill direct from faucet at same or a bit warmer temps. then I use Prime.
problem I have with python or lee's is the faucet must be turned on to create pressure to suck out the water.
but using JBJ is perfect for vac & taking water out & then DIY your own hose system to connect to the nearest sink for fill up.
but if you want the python I found ken's to be the best prices for most of his products & doesn't kill you on shipping (so worth it to buy more stuff needed from ken's wide product selection)
http://www.kensfish.com/waterchangers.html
