I bought some dry trace elements from the nursery and was wondering how I go about dosing it. Will I need to mix it in with some water?
Here are the analysis of the product;
Sulphur (S) as Sulphates 6.29%
Calcium (Ca) as Calcium Carbonate 10.00%
Magnesium (Mg) as Magnesium Sulphate 3.62%
Manganese (Mn) as Manganese Sulphate 2.88%
Iron (Fe) as Iron Chelate 2.73%
Copper (Cu) as Copper Sulphate 1.25%
Zinc (Zn) as Zinc Sulphate 1.00%
Boron (B) as Sodium Borate 0.09%
Molybdenum (Bo) as Sodium Molybdate 0.0038%
Thanks for reading
Here are the analysis of the product;
Sulphur (S) as Sulphates 6.29%
Calcium (Ca) as Calcium Carbonate 10.00%
Magnesium (Mg) as Magnesium Sulphate 3.62%
Manganese (Mn) as Manganese Sulphate 2.88%
Iron (Fe) as Iron Chelate 2.73%
Copper (Cu) as Copper Sulphate 1.25%
Zinc (Zn) as Zinc Sulphate 1.00%
Boron (B) as Sodium Borate 0.09%
Molybdenum (Bo) as Sodium Molybdate 0.0038%
Thanks for reading