I was wondering if someone would tell me if it would be ok with proper filtration to put 3 oscars in a 72 gallon bowfront? If not what would be the minimum size tank for 3 oscars. Also, what filtration and other equipment would you recommend? Thanks for any help.
oscars for a 72 gal bow front
- Thread starter dezaster
- Start date
I would say a 72 would not be large enough for 3. I would recommend a 125.
As for filtration, the best solution once you get to a tank that large is a wet dry. Other than that, you will need at least 3 HOB or cannisters...
As for filtration, the best solution once you get to a tank that large is a wet dry. Other than that, you will need at least 3 HOB or cannisters...
I don't have data to give a solid recommendation on a wet dry. The only one I have experience with is an Aqua Clear with a couple of Aqua Clear CAP pumps. Works well though 
As for HOB's, Emperor 400's would do the job well....
As for HOB's, Emperor 400's would do the job well....
I thought about a 72 g bowfront for my one oscar, but its only like 12 5/8" at the side. If your oscars get to 14" they'll only be able to turn around in the middle 
a 73g bow will be just fine for up to 2 oscars. 3 might be good but will be pushing it.
it is very very rare for oscars to reach 14inchs the longest I can think of was 12 and he was very old.
for filters I like the Aquaclear 500s. they are rated for 100g+ so get two on there. and load them out with double sponges.
wet/drys are a very good option too. they are very easy to DIY too for cheap. Just type diy wet/dry in google and you should get lots of articles on how to. or just look in the DIY section here.
it is very very rare for oscars to reach 14inchs the longest I can think of was 12 and he was very old.
for filters I like the Aquaclear 500s. they are rated for 100g+ so get two on there. and load them out with double sponges.
wet/drys are a very good option too. they are very easy to DIY too for cheap. Just type diy wet/dry in google and you should get lots of articles on how to. or just look in the DIY section here.