Jeremy S
12-06-2003, 4:38 PM
I would like to add a solenoid valve and a pH controller to my CO2 system and I was wondering if the clippard mouse valves (http://www.clippard.com/store/byo_electronic/byo_mouse_valves.asp) work with a Milwaukee SMS122 pH controller. The clippard valve that I was thinking of getting is the ET-2-12
Here are the specs for the ET-2-12 valve.
Medium: Air (40 Micron Filtration)
Poppet Travel: 0.007"
Life Cycles: Over 1 Billion
Response Time: 5-10 Milliseconds
Body Material: Nickel Plated Brass
Construction: Click here (http://www.clippard.com/images/byo/electronic/ev_construction.pdf)
Connection: 0.110 Terminal Spades
Connector P/N: ET-C48 or ET-C120 or 3831
Used As: Normally Closed
Function: 2 way valve
Ports: 10-32 Female Inline ports
Mounting: #6-32 thd. Mounting Holes
Voltage: 12 Volts DC
Power: 0.67 watts
Pressure Range: 28" Hg Vac. to 105 PSIG
Flow: 0.6 SCFM @ 105 PSI
Temperature: Minus 20 to 180 F
BTW is it possible to place the solenoid valve after the bubble counter?
Here are the specs for the ET-2-12 valve.
Medium: Air (40 Micron Filtration)
Poppet Travel: 0.007"
Life Cycles: Over 1 Billion
Response Time: 5-10 Milliseconds
Body Material: Nickel Plated Brass
Construction: Click here (http://www.clippard.com/images/byo/electronic/ev_construction.pdf)
Connection: 0.110 Terminal Spades
Connector P/N: ET-C48 or ET-C120 or 3831
Used As: Normally Closed
Function: 2 way valve
Ports: 10-32 Female Inline ports
Mounting: #6-32 thd. Mounting Holes
Voltage: 12 Volts DC
Power: 0.67 watts
Pressure Range: 28" Hg Vac. to 105 PSIG
Flow: 0.6 SCFM @ 105 PSI
Temperature: Minus 20 to 180 F
BTW is it possible to place the solenoid valve after the bubble counter?