your membrane is not seating proper or damage to the O Rings or sealing surface
on your membrane there should be two small O rings on one end and that inserts first ( if i remember right) you need to push that in and allow for the two o rings to mate with the sealing surface inside the canister, you should feel some resistance when the O rings start to seal at that point you well need to push it in another 1/2 inch or so , The nipple with the O rings on the membrane has to slot into a tube as such, On the other end of your membrane the end with the thread on the canister there should be a seal or some kinda of rubber ring that apart of the membrane and that seals the other end of the canister and the threaded cap holds it in place.
I am thinking your membrane is not inserted in all the way
This is all from memory and cant say what i just said is all true
your carbon filter well remove chlorine and if you have chlormain you well need a chlormain filter both are bad for your membrane
you can find out from your water dept.
on your membrane there should be two small O rings on one end and that inserts first ( if i remember right) you need to push that in and allow for the two o rings to mate with the sealing surface inside the canister, you should feel some resistance when the O rings start to seal at that point you well need to push it in another 1/2 inch or so , The nipple with the O rings on the membrane has to slot into a tube as such, On the other end of your membrane the end with the thread on the canister there should be a seal or some kinda of rubber ring that apart of the membrane and that seals the other end of the canister and the threaded cap holds it in place.
I am thinking your membrane is not inserted in all the way
This is all from memory and cant say what i just said is all true
your carbon filter well remove chlorine and if you have chlormain you well need a chlormain filter both are bad for your membrane
you can find out from your water dept.
Last edited: