DIY Marineland H.O.T spray bar

nguyendetecting

nguyendetecting

"Swim along with the snorks"
Jul 31, 2008
1,147
1
38
43
Tallahassee, Fl
www.youtube.com
Just got done assembling and spraying it yesterday. I decided to put a port for my co2 line in it also. I tested it on my 55 before painting. None of the pieces are glued together. They fit very tight together even to the point I almost thought it was stuck on. Anyhow it slide on the end of the hot output also so no adapter needed there either.

DSC_0073 (Large).JPG DSC_0075 (Large).JPG DSC_0084 (Large).JPG DSC_0087 (Large).JPG DSC_0091 (Large).JPG DSC_0092 (Large).JPG DSC_0097 (Large).JPG
 
thanks all! I'm not sure about the co2 in the spray thing working. I know the air is trapped in the bar and is slowly disolved. Some bubbles come out but barely and are super small. So I guess in a sense it's working. I'll let you know tonight when I have the tank on and lights on for 6/8hrs
 
I'm assuming that 1" tubing, and what size are the holes in the spraybar?
 
you should make them spray bars and sell them i have 17 HOT magnums and would love that option of a spray bar.
 
making them is easy painting them is the pain and stinky too. I'm making a setup for my eheim soon. If you have 17 of them go out to home depot! I'll give you a parts list if u want. You don't have to use glue if u don't want to. And could even have homedepot cut the pieces. I just check the holes are 13/64 lol just what I had lying around
 
yes PLEASE post the parts list - thanks
 
You must log in or register to reply here.
AquariaCentral.com
Top Bottom