125 gallon project...

Spray bar is in place and one fx5 is up and running. The second fx5 is being a pain. It's noisy and I have taken it apart a couple times already.
One more time then I am sticking with one fx5 for the tank and thinking dual intakes so I have both ends of the tank covered.


Sent from my iPhone using MonsterAquariaNetwork app

ImageUploadedByMonsterAquariaNetwork1338563173.244505.jpg ImageUploadedByMonsterAquariaNetwork1338563195.452999.jpg ImageUploadedByMonsterAquariaNetwork1338563216.051201.jpg
 
You are almost there... it is looking great.
 
Tanks full, filter is running, spray bar works great, and two bags of substrate installed. I'll do a w/c tomorrow and add some more substrate.
I plumbed in a T on two intakes to have an intake on each side of the tank. That did not work out very well.
Tell me if this sounds crazy but should I drop the tubing down to 1/2 in order to have two intakes on the fx5?
3/4 doesn't work very well.


Sent from my iPhone using MonsterAquariaNetwork app
 
With my Current Stock:

1- delhezi bichir (Polypterus delhezi)
2- senegal bichir (Polypterus senegalus senegalus)
2- blue acara (aequidens pulcher)
1- firemouth (thorichthys meeki)
1- rainbow shark (epalzeorhynchos frenatum)
3- zebra danios (danio rerio)
hand full of cories I think.
I wake up in the morning and all these guys are front and center waiting to be feed. Even the del which is very playful and a attention *****. The stock is working out better then expected.



Sent from my iPhone using MonsterAquariaNetwork app
 
'Grats! :)

I just got a used 125 I'm cleaning up the trim on and doing a similar project over the next couple months, I may steal, err, borrow some of your ideas :)
 
need pics...:thumbsup:
 
You must log in or register to reply here.
AquariaCentral.com
Top Bottom