4300 Gallon Plywood Build (3600+ Take 2)
- Thread starter Nolapete
- Start date
Can't wait to get home today and start working on the tank and fish room. It's going to be a beautiful and productive weekend. If you're in the area and want to stop by, let me know.
wow what a way to spend my saturday night! 3 hours of reading from page one and i may add i hate reading but i am captivated and also envious! I can't wait to see the finished product! it has always been a dream of mine to so much as have a tank in the wall but you have added a whole new dimension to "tank in the wall" I can't even begin to think how much time and preparation has gone into this project, gosh it took me forever just to built a 65gallon (8 months ago) but i'm far to scared to water test it as i have already had to take it apart once and really dont want to do it again.
Good luck with sealing!
Good luck with sealing!
And now for something completely different...Just call me Vincent
I feel like Van Gogh!
First pic is from a year ago from the initial attempt at building this monster. The rest are from just after midnight when I finally finished off the 1 gallon that I started with. A thin coat goes a long way. Many more thin coats to go, but enjoy.
I feel like Van Gogh!
First pic is from a year ago from the initial attempt at building this monster. The rest are from just after midnight when I finally finished off the 1 gallon that I started with. A thin coat goes a long way. Many more thin coats to go, but enjoy.
Maddie, it dries pretty quick, so won't really be a big deal to do. Just have to not paint myself into a corner away from where I can reach the ladder to get out. I would have started on the floor, but I was too tired to deal with toting the shop vac over the wall of the tank and back out again.
