Advice needed for newbie!!

i see people all the time saying i cant use this ammonia cause it has surfactants in it...your wrong guys.... surfactants are not soap! its various chemicals used to break the surface tension of water so the soap can do a better job of cleaning... as long as the ammonia does not contain detergents or fragrances the surfactants wont hurt a **** thing
 
However, surfactants are often toxic in their own right. Moreover, the dividing line between surfactants and detergents (as opposed to soap) is fuzzy; detergents are are a form of surfactant. I'd avoid anything with a surfactant in for that reason.

Moreover, I can't imagine that adding something which changes the physical properties of water is a particularly good idea.
 
no worries, well its the 4th day that I've been adding flakes and still no ammonia showing up, also i'm worried about the glue for the thermometer now!! I took the thermo off but its left a bit of a glue residue?

Also, the PH of water coming out the tap is off the chart - 8.8 however after 2-3 days in the aquarium, it came down to 8.2 so dn't know what the crack is, probably need a GH and KH test kit?
 
Could you give us a list of all supplies that you have? It will help anyone offer advice to let you use what tools you already have on hand..

The tap is a high pH.. but there are ways to help better the water before putting it in the tank. Aeration is one and even just letting the water sit out can alter the pH..
 
KarlTh said:
Letting the water stand will cause pH to rise as CO2 is offgassed, not drop.
Click to expand...


by "standing" I meant with a simple air pump... I did not make myself very clear..a small amount of aeration will make a difference. Stagnant water is normally not a good idea.
 
Regarding ammonia - fishless cycling can take a few weeks to complete from what I understand. If you know someone with an established tank that you could get some filter media from, that would speed things up a lot.

Also, what is your water source - town or well? If you have well water, is it being treated with a water softener? You should get a GH/KH test kit. If you have treated well water, you might consider testing the water right out of the well in addition to testing it after it's been treated. See what the KH is before you consider trying to alter the pH.
 
No worries, water is coming from the town source, if the PH naturally drops over time, it doesn't really worry, its only if in the future I do water changes, the PH will change quick, which might stress the fish?

List of supplies:

- Water Conditioner
- API Test Kit
- A 150W heater
- Fish Flakes
- Sera Nitrivec - Waiting on ammonia to register before putting this in
- Air Pump which I have on for the majority of the time in the tank

I'm not keen on using any chemicals to alter the PH, rather use a natural method such as bogwood or driftwood in the tank. Also, the digital thermo is out and is replaced with a probe thermo but a bit of glue is left on the glass, I'll let it be as I have no fish in the tank at the minute and it should naturally come off over time,

do you think this is a good idea? All your help is much appreciated!! :-)
 
You must log in or register to reply here.
AquariaCentral.com
Top Bottom