Well, I have something like a plan for the 90. I'll start with the equipment and the plan, and end with some specific questions.
What I'd like is a reef, with some nice SPS, maybe even a few acropora, on one side, soft corals on the other, plus a few clams on the sandbed.
The equipment
90 gallon reef ready tank
Cabinet stand
Canopy, extended 8" for metal halide (have the lamps about 12" from surface)
Halides: 2X250 watt Iwasaki, Electronic ballasts (1 icecap, 1 blueline), icecap sockets/reflectors
2X96W PC actinics from AH supply
20 gallon long sump/fuge
EuroReef ES5-3 skimmer
DIY calcium reactor
Return pump? Iwaki 30RLXT
Topoff reservoir. I was hoping to do something simple, like a float valve and gravity feed.
3-4" bed of playsand
40 lbs Florida live sand
60 lbs lace rock
120 lbs TBS live rock (80 new plus 40 from 20H)
The plan
Modify canopy for metal halides: halides 12" from water, PCs 4" from surface, add 2X4" fans
Paint canopy and stand to match decor
Buy, drill, and partition 20L for sump/fuge
Install plumbing
Wet test
Fill with salt water
Get the tank cycled with the sand, lace rock and rotting shrimp, innoculated with sand and rubble from the 20.
Add live sand and live rock.
Wait a while.
Have a blast.
This is the perfect time to tell me what looks bad (or good), since I only have the tank, stand and a ballast. I also have a few specific questions.
1. Do I really have enough room for a skimmer and decent fuge in a 20L?
2. With the 20L in the stand (about 45"X16"), any ideas about topoff reservoirs?
3. Is the Iwaki a good choice? It's nominally 960 gph. Is there a more reliable or better pump to use?
What I'd like is a reef, with some nice SPS, maybe even a few acropora, on one side, soft corals on the other, plus a few clams on the sandbed.
The equipment
90 gallon reef ready tank
Cabinet stand
Canopy, extended 8" for metal halide (have the lamps about 12" from surface)
Halides: 2X250 watt Iwasaki, Electronic ballasts (1 icecap, 1 blueline), icecap sockets/reflectors
2X96W PC actinics from AH supply
20 gallon long sump/fuge
EuroReef ES5-3 skimmer
DIY calcium reactor
Return pump? Iwaki 30RLXT
Topoff reservoir. I was hoping to do something simple, like a float valve and gravity feed.
3-4" bed of playsand
40 lbs Florida live sand
60 lbs lace rock
120 lbs TBS live rock (80 new plus 40 from 20H)
The plan
Modify canopy for metal halides: halides 12" from water, PCs 4" from surface, add 2X4" fans
Paint canopy and stand to match decor
Buy, drill, and partition 20L for sump/fuge
Install plumbing
Wet test
Fill with salt water
Get the tank cycled with the sand, lace rock and rotting shrimp, innoculated with sand and rubble from the 20.
Add live sand and live rock.
Wait a while.
Have a blast.
This is the perfect time to tell me what looks bad (or good), since I only have the tank, stand and a ballast. I also have a few specific questions.
1. Do I really have enough room for a skimmer and decent fuge in a 20L?
2. With the 20L in the stand (about 45"X16"), any ideas about topoff reservoirs?
3. Is the Iwaki a good choice? It's nominally 960 gph. Is there a more reliable or better pump to use?