I'm trying to change the bulb in my Coralife Aqualight, but I can't figure out how to get the bulb out. It's a straight pin 50/50 bulb.
Can anybody help?
Can anybody help?
Coralife Aqualight Question
- Thread starter TonyN
- Start date
If it's like mine, you do this:
Pull off the band things that hold the two tension clips together.
Pull the bulb out of the tension clips. (Just pull straight out on the side without the electical connector.)
Pull the bulb off of the connector by pulling on the plastic part at the end of the bulb while holding the black connector part.
I hope this helps.
Sam
Pull off the band things that hold the two tension clips together.
Pull the bulb out of the tension clips. (Just pull straight out on the side without the electical connector.)
Pull the bulb off of the connector by pulling on the plastic part at the end of the bulb while holding the black connector part.
I hope this helps.
Sam
Ok - I got it now. Thanks a lot. I Really appreciate it. I also feel like a dummy. Oh well.........
Thanks again,
Thanks again,
I'm very interested in the 20inch/96w Coralife Aqualight for my 20g SW tank I'm setting up. Where did you guys get your lights? Is there a place online with a good price? I've found one locally, they want $129 for it. I think I saw one on ebay, $89 plus shipping (still cheaper than locally)
Any help or ideas appreciated, thanks
Any help or ideas appreciated, thanks
I got mine at "The Pet Store." It's probably the best priced thing I've found there. 24" double 65W 6700K light strip for 100 bucks. I couldn't really find it cheaper anywhere online (although I didn't look super hard). I figured that for having it right then instead of waiting, I wasn't going to spend much if any more for it. Drs Foster/Smith and Big al's have it for $130. I think it must have been a fluke...
Sam
Sam