Hi, I recently completely emptied the tank of my AC 30 Culligan RO system, due to severe levels of sulphur in my new well. ( I just bought a 1000 gal aeretor tank and water system to clear this up). I bought all new filters and a new RO membrane, but there is no water coming out of the spigot and no water going into the tank. Did I damage the tank by draining all of the bad water from it? I put about 30psi into the tank and still no water. I don't know if this is the place to ask, but I'm taking that chance, since I typed in "help culligan ro system" in search and this page was the first link. If anyone could help, I would be forever grateful!!
