Ten days ago I started two 20 gal tanks. One will be a display tank and has an Emperor 280 filter and an inch of gravel. The other is a quarantine tank and has a Penguin 125. The Emperor has not been used in years. The Penguin was on a tank with one fish in it for a few months, but has been dry for a couple weeks. The gravel was in that same tank, but has been rinsed very well in tap water since. Both tanks were filled with chlorinated tap water and the filters ran for 24 hours before I added dechlorinator. I then added ammonia to both tanks to bring them up to about 4 ppm.
In the display tank over the past few days the ammonia is down to 0 ppm, nitrites are up to 2 ppm and nitrates are 5 ppm. So, things are progressing great. I added more ammonia. In the quarantine tank ammonia is still 4 ppm with no nitrite or nitrate.
Does this seem strange?
In the display tank over the past few days the ammonia is down to 0 ppm, nitrites are up to 2 ppm and nitrates are 5 ppm. So, things are progressing great. I added more ammonia. In the quarantine tank ammonia is still 4 ppm with no nitrite or nitrate.
Does this seem strange?