I have become very interested in working with T5 lighting. I have a hood that is limited to distance away from the water, and the T5 produces less heat. I have been looking for inforamtion on ballasts and T5 80watt bulbs. They work better to penatrate to the bottom of the tank.
I have gone all over the net and have contacted many Engineers on designs. Dimmable Ballast (NICE) , Electronic Ballasts, are only a few of the options that are out there.
The one problem I'm having is the wattage rule. (4-6 watts/ gallon) If the T5 produces more lummens then therefore I would need less wattage to get the same output as it would be for a comparable MH. I have heard that a 400 watt metal halide system can be replaced with a 6 lamp T5HO, (of course in the right spectrum.) I talked to the techs at Universal Lighting and they where unsure. This is an odd new technolgy. Should be interesting to watch.
Has anyone got new information on this. I look forward to see you all tommorow.
I have gone all over the net and have contacted many Engineers on designs. Dimmable Ballast (NICE) , Electronic Ballasts, are only a few of the options that are out there.
HTML:
http://www.osram.dk/B2B/brochurer/HF-forkoblinger_og_transformere/Osram_T5-Fibel_final.pdf
HTML:
http://www.universalballast.com/
The one problem I'm having is the wattage rule. (4-6 watts/ gallon) If the T5 produces more lummens then therefore I would need less wattage to get the same output as it would be for a comparable MH. I have heard that a 400 watt metal halide system can be replaced with a 6 lamp T5HO, (of course in the right spectrum.) I talked to the techs at Universal Lighting and they where unsure. This is an odd new technolgy. Should be interesting to watch.
Has anyone got new information on this. I look forward to see you all tommorow.