Help with tank divider

[rdub2008]

I need to separate a couple of pair of discus. No one makes a divider for my 60 gallon tank. Plastic mesh works fine but I can't find the side rails that go up against the sides of the tank. Anyone know who might make or sell these?

 

[Rbishop]

use some report cover slides...??

 

[rdub2008]

That doesn't give me the flat side to butt up against the sides of the tank.

 

[Rbishop]

The ones I buy do....

 

[eadiemcreadie]

have you thought about the cover from a plastic cable tidy, i used them once for a rail on a sliding door cabinet i made for my school tech project. seemed to work okay.
something like this?
http://cgi.ebay.co.uk/Self-Adhesive...rkingTools_Accessories_SM&hash=item4cf1c9df99

 

[toddnbecka]

I can hook you up with a 2" thick poret foam divider custom sized for your tank. Best divider you can have for a spawning/fry tank, it's essentially a giant sponge filter and will support plenty of micro-critters for tiny fry to graze on between feedings. If/when you don't need the divider any longer just move it to one end of the tank and use it as a mattenfilter.

 

[LiveMermaid07]

I don't remember what it was called, but I found something in the roofing section at Lowes that worked. They had a few different shapes, but basically it's long plastic almost half tube like thingys and they cut fairly easily with scissors (their like 10 feet long at the store). I didn't cut my canvas quite the right size though, so because of that they slip and I have to put suction cups on either side, but it works.

 

[cdx008]

This may be what you were looking for:

http://cgi.ebay.com/Aquarium-Tank-S...843?pt=LH_DefaultDomain_0&hash=item2a0c556693