how to clean magnum micron filter?

zachjohnson65

AC Members
Mar 31, 2007
476
0
0
44
Staunton, VA
easy question how to clean marineland magnum micron filter? also how long do they last? thanks
 
I rinse mine in warm water and run my finger in between the pleats. I then soak it in bleach water and let air dry. I am not sure how long they last as alot of that depends on how often you use it, but I have had mine over a year and it still does it's job.
 
To clean the filter just soak overnight in a 20:1 ratio of water to bleach. Rinse out in tapwater and let air dry.
It should last years and years.
 
i will get some bleach tomorrow, i tried soaking in vinegar and water but that did not help.
 
Got one soaking in bleach water at the moment, soak overnight, then rinse well. use regular unscented bleach.....:)
 
Marineland suggests a 9 - 1 water to bleach ratio for their Micron filters. Soak for no more that 24hrs! I've found that soaking longer can cause the blue rubber seals on the top and bottom of the filter to start to deteriorate and melt.
 
So mine started doing that and it smells like bleach but only in the rubber end pieces, should I still try to use it ? I rinsed the filter for a long time with a pressure hose outside and let it dry in the sun but it still stinks on the blue rubber things… I tried scratching it off with a nail brush but it still smells!!!! What should I do ?…j was going to try to boil it in hot water to see if that helped
 
You can try soaking the micron filter in a bucket of tap water with a double dose of Prime water conditioner or a similar product that neutralizes chlorine for an hour or so.
 
AquariaCentral.com