Hey everyone,
Just looking into lighting for my 125g tank, been doing a bit of reading and have come across a lot of conflicting info.
Most people say 3wpg of light is needed for plants, but of what type of lighting is that rule based on?
To better explain my question.
Based on the info I've found on the net comparing different systems of lighting and there light output, and working on my tank requiring 375w of lighting, I've calculated that 375w of incandescent lamps (3x100w + 1x75w), has the same light output as 80w of fluorescent lamps (2x40w 48 inch T8's), which has the same light output of a single 50w metal halide bulb.
Now I'd consider 2x 48inch 40w fluorescents to be standard fish only lighting for my tank, so I take it the 3wpg rule is not based on incandescent lamps, and is maybe based on fluorescent lamps, but I also see people advising the use of 150w of metal halide for a 55g tank, which would equate to 240w fluorescent lighting, you can see why I'm confused.
I already have 2x 48inch 28w HO T5's (which is suppose to be equivalent to 2x 48inch 36w T8's) on my tank, and was planing on adding the same again to the hood (so 4x 48inch 28w HO T5's), but now I have no idea what to do.
Thanks for taking the time to read, and any replies would be greatly appreciated.
Thanks,
Dave
Just looking into lighting for my 125g tank, been doing a bit of reading and have come across a lot of conflicting info.
Most people say 3wpg of light is needed for plants, but of what type of lighting is that rule based on?
To better explain my question.
Based on the info I've found on the net comparing different systems of lighting and there light output, and working on my tank requiring 375w of lighting, I've calculated that 375w of incandescent lamps (3x100w + 1x75w), has the same light output as 80w of fluorescent lamps (2x40w 48 inch T8's), which has the same light output of a single 50w metal halide bulb.
Now I'd consider 2x 48inch 40w fluorescents to be standard fish only lighting for my tank, so I take it the 3wpg rule is not based on incandescent lamps, and is maybe based on fluorescent lamps, but I also see people advising the use of 150w of metal halide for a 55g tank, which would equate to 240w fluorescent lighting, you can see why I'm confused.
I already have 2x 48inch 28w HO T5's (which is suppose to be equivalent to 2x 48inch 36w T8's) on my tank, and was planing on adding the same again to the hood (so 4x 48inch 28w HO T5's), but now I have no idea what to do.
Thanks for taking the time to read, and any replies would be greatly appreciated.
Thanks,
Dave
Last edited: