looking for DIY reflectors for spiral CFLs

[fl4ian]

I have some brooder lamps, but am looking to make something economically that will not allow so much light to be wasted. anyone have any links?

 

[Christopherb]

Could always buy Mylar and make something from there.

 

[fl4ian]

mylar is super flimsy though isn't it? what would be the skeleton?

 

[fineexampl]

www.sciplus.com

search for mylar. they have mylar blankets for like $2.50 or something. great reflectivity.

 

[jmhart]

White paint, seriously your best DIY option. Cheapest, easiest to work with.

 

[vequalsir]

White paint is likely your easiest bet and quite effective.

Hardware stores also carry foil tape. It's a thick piece of foil with an adhesive backing. It is stronger than mylar.

 

[coach_z]

high gloss white spraypaint (aka krylon)

you could also remove the top and bottom of several soda cans, then cut them in half, then tape/glue/screw/nail/whatever them all together sand inside with super fine sandpaper to get a reflective surface....i think this is going to be my next DIY project...soda can hood.

 

[ebola]

I once used a plastic window box lined with big coffee cans cut in half lengthwise. Looked like hell but did the job

 

[ITHURTZ]

I always wanted to try mirror window tint.

 

[excuzzzeme]

Not advisable to make a reflector as you would increase the amount of restrike and end up with less useful light. The painting of the area in white as has been suggested is the best option.