Mag 350 "sleve"

Ok, well here is what I have...

IMG_0059.JPG IMG_0060.JPG IMG_0061.JPG IMG_0063.JPG
 
LMAO!! Its a 330 not a 350
 
Looks good, let it rip...........:)
 
thats alright its just bout the same and yes thats how it goes. just make sure the filter pipe that you see in the canistar in pic 2 is in the right location. there are diff hole sizes and diff post sizes so it goes the correct way i messed this up the first time on mine. also you got a pic of the ceramic and chem
 
OOOOOOH BTW make sure to test the unit before you put it in. use 2 tubs one with water in and one for you to put the filter in. i learned this lesson after i put mine up and started running it the next morning i found it leaked out. I lost almost 10 gallon of water in one night cause the seals were bad at the lid.
 
Well, this is what I have...the brown stuff is in little "bags", then I have a carton thing of active carbon if it should be used

IMG_0064.JPG IMG_0068.JPG
 
wrap the post in the center of the basket with the brown bags then place some carbon on the bottom then the ceramic in white on the top. about 50/50 for the carbon and ceramic
 
OK, let me get it thrown together and you tell me if it is right. :)
 
Wait...do you mean to put it INSIDE the basket? Take the white stuff off open it and put it in there? Cause that is going to be rather hard to do?
 
not dont do that. the top of the basket in pic 1 you can see a black lid pokeing out just try and pull it off it should come off with ease fill in there youll see a post in the center
 
AquariaCentral.com