lol...it was great. I actually like the narration. Maybe you could get a spokesmodel to point to things for you and open up heater controller boxes for you...
Making my 800 gal bigger.
- Thread starter MonsterFishResc
- Start date
HA ha! One of my daughters would do it for sure... But getting my three year old to do it would be hysterical! LOL great idea!
Hi Fish Guy! I tried to PM you about a donation to MFR but you do not accept PMs. Can you send me a PM with your contact e-mail or some way to get in contact with you? Sorry to sidetrack your thread for a minute.......Thanks!
I guess i need to check my settings...Up date #16
You can either watch this:
http://www.youtube.com/watch?v=g-wl5cUObm4
Or read this:
First off, the Pondarmor is here! Here and under strict orders to acclimate for a day. The cans were submerged in hot water for an hour then they’ll sit until tomorrow late morning when we’ll start doing the seams! Sunday morning we’ll go over the whole thing looking for touch ups, which according to Butch we’ll have some. The bummer is I’ve got a side job to do Monday and Tuesday. So the glass won’t get put in till Wednesday…
Also, the circulating pump is here and installed for the heating system… Along with a “T” and valve put in one of the hot lines running towards the tank. This “T” will feed water through the pex tubing that will be coiled up in the sump tank which will act as a radiant heating system to keep the tank at 80*. The pump still needs to be wired and so does the temperature controller. Honestly I’m not too worried about the sump and heating system, I just want to get this thing test filled!
I also cut up 2” strips of fiberglass mat to put in over all the seams… I’m ready to start water proofing, it’s just waiting till the morning to get started by vacuuming the tank out and starting the process… Yeah. Like I’m going to get any sleep…
You can either watch this:
http://www.youtube.com/watch?v=g-wl5cUObm4
Or read this:
First off, the Pondarmor is here! Here and under strict orders to acclimate for a day. The cans were submerged in hot water for an hour then they’ll sit until tomorrow late morning when we’ll start doing the seams! Sunday morning we’ll go over the whole thing looking for touch ups, which according to Butch we’ll have some. The bummer is I’ve got a side job to do Monday and Tuesday. So the glass won’t get put in till Wednesday…
Also, the circulating pump is here and installed for the heating system… Along with a “T” and valve put in one of the hot lines running towards the tank. This “T” will feed water through the pex tubing that will be coiled up in the sump tank which will act as a radiant heating system to keep the tank at 80*. The pump still needs to be wired and so does the temperature controller. Honestly I’m not too worried about the sump and heating system, I just want to get this thing test filled!
I also cut up 2” strips of fiberglass mat to put in over all the seams… I’m ready to start water proofing, it’s just waiting till the morning to get started by vacuuming the tank out and starting the process… Yeah. Like I’m going to get any sleep…
