ok so this is going to be 300 gal rack. 3x60 gal and 3x20 gal. its plywood so i sealed it..... then i found some contact paper i had and was like screw it so i wrapped it it in that too. its a little hard to get pics i have junk in front of it for now until i move out. as you can see i got the tanks on cleaned bulkdhead plugged for now. foam under the 60 gal and need to do it on the 20 gal tanks. i have lids i might use. i got the power cord and power stripes sitting there. i have a some cf lighting sitting on top of the one. have 2x96w lighting for the other 2 tanks. the 20 gals not sure what ill do maybe clf bulbs though i do have one more 55w ahsupply kit..... i have the heaters and seeding the filters. they will be hobs sponge filters and prob a couple xp2 xp3 canisters i dont know..... i painted 5 of the tanks black and the one i had was already blue so i left it. this time i used roller paint just for the shear cost and effort. i have to do spray paint out side and would only be able to do one at a time. i was able to do 2 and 3 at a time to speed things up. for the gravel..... i have some sms black and Flourite to use in the 20 gals. i want to get some of that 3m colorquatz to try out mixed with sms. o well..... there it is....
