PVC CO2 Diffuser Question

[imafloormatt]

I am in the process of making a PVC CO2 diffuser like this one > http://www.plantedtank.net/forums/diy/65191-my-diy-co2-reactor.html
My only worry is what I should use as glue. Is normal PVC primer and cement going to kill fish or mess with my water? If I shouldn't use the normal stuff, what should I use?

 

[jbradt]

PVC primer and cement is the right stuff from what I've read. Once it's dry, it shouldn't leech anything into the water. Again, that's not from experience; but it's what I've read and heard from several sources.

 

[Ozymandias]

nope the normal stuff should be fine never had a problem with the three reactors ive built with it.

 

[andyjh]

Just built one last week. My local hardware store had a combo PVC primer/cement in one can, eliminating the need for a double purchase (and an extra step) Flush it out for a while in fresh water before putting it to use. I don't believe the cured product will be harmful to the fish. Many of these already in use.
Andy

 

[imafloormatt]

Perfect. Thanks for all the help guys!

 

[ghengis]

The "normal stuff" is the exact same that your plumber would use to plumb your kitchen sink, or water supply pipes. It is completely potable and completely safe.

 

[Pavo71]

The Primer comes 2 different ways, purple or clear.

Nothing is different between the two other than color.

Get the clear, the purple stains bad!