CWO4GUNNER
USN/USCG 1974-2004 Weps
Just an after thought. Since it makes sense that strait 100% RO would never be used but mixed with tap water like 50%. Why would (as mentioned earlier in a earlier post) you replace an RO membrane at 90% loss of efficiency? Why wouldn't you wait until the RO membrane TDS efficiency matched the ratio of RO/Tap water mix and simply use less tap water until membrane efficiency dropped to like 50%.
I mean in my case (800 TDS) If I were mixing RO/Tap 50/50 for 400 TDS result. I would definitely ride the membrane down using a greater percentage of RO to at least to where it was putting out at least 400 TDS for the same result as mixed saving on membrane cost right?
I mean in my case (800 TDS) If I were mixing RO/Tap 50/50 for 400 TDS result. I would definitely ride the membrane down using a greater percentage of RO to at least to where it was putting out at least 400 TDS for the same result as mixed saving on membrane cost right?