I coulden't find any that was small enough for it....guess I'll have to go with the kit and have 11 extra pieces!
Running DIY Co2 Through a c-160?
- Thread starter Paintballer99
- Start date
1 last thing, do i Need a diffuser or can I just put the tube inside the tank and the bubble will come out....
It can and will.
Thats what you got a Check Valve for. To prevent it from going all the way to the bottle and filling it up. : )
Until you get pressure built up from the DIY CO2, the water lvl in the airline will be about the same as the water around it
Give your DIY co2 about 12 hrs to get going. There are alot of variables that can and will make a difference of how fast you start seeing bubbles. Just don't start thinking you messed it up, because you've been starring at it for an hour and it hasn't made a bubble yet.
Oh I see now! But what about the gas seperator? that (according to the charts I've seen on here) has no check valve on it... won't that fill with water
And the only thing about your diagram, is that I'm going to have to run the airline right next to it because there are suction cups from the intake that goes right behind it....It should still work with the elbow right next to it?
