Sealant Bubbles

What was wrong with the first one? Maybe try getting a tank elsewhere, after returning this one (if thats what you are going to do)
 
i would try somewhere else too. if you are going to try someplace else, try a pet supply store that has an individual owner (small buisness type place) if there are any in your area. smaller shops usually have better prices, and then they know what tpye of tank you have if you ever need anything. small shop personel are better at giving advice if you ever have any problems
 
I appreciate the help. Sounds like on Monday I need to load up the tank and send it back. There is a LFS and I will check them out. The first one also had bubbles in the seam. Sounds like they were trying to off load some bad ones. Thanks again
 
Bentley said:
I had to use my phone and the flash was pretty bright but you can see the bubble line in the middle it starts 1" below the trim.

Maybe its just me but I cant make out anything in that picture at all to say if its good or bad. I"d say try using a regular camera for the pics so we can give you a better opinion.
 
I will have a better pic in about 45min batteries are charging for my camcorder which also takes photos.
 
hope this pic is a little better even though it is a small file. Sorry haven't really figured out this camcorders picture taken. But you can see the seam and the bubble line (hopefully).I went back and pulled up the pic through the forum to see what yall will be seeing and sorry everyone thats still small. I got better pics but the files are to large to upload.

MVI_0103.JPG
 
Last edited:
AquariaCentral.com