tempered glass??
- Thread starter Maxpower
- Start date
The best suggestion I have to give is to check with the manufacturer... It also depends on the size of your tank and the thickness of the glass...
I have an all-glass 125g and its all tempered... I cant drill my tank
If you know who made it and what size it is, look it up...
Other than that, I don't know how to tell a difference.
You could try to google it?
I have an all-glass 125g and its all tempered... I cant drill my tank
If you know who made it and what size it is, look it up...
Other than that, I don't know how to tell a difference.
You could try to google it?
Drobes is spot on...just put on a pair of sunglasses and look at the glass from a slight angle. If it is tempered, you will see dark spots all over the glass. Quite easy to check for...
Niko
Niko
FlowRate for closed loop??
Oh ok thanks alot guys. Ill deffinetly check that out..wouldnt want to shatter my tank lol. But now im wondering what size bulk heads i should use. Im going to drill an over flow near the top of the tank and have 2 reaturn lines coming through the bottom for a closed loop system that comes out of the sand. Its an 80G and i cant figure out the flowrates... it will drain into my sump then get pumped back up...
Oh ok thanks alot guys. Ill deffinetly check that out..wouldnt want to shatter my tank lol. But now im wondering what size bulk heads i should use. Im going to drill an over flow near the top of the tank and have 2 reaturn lines coming through the bottom for a closed loop system that comes out of the sand. Its an 80G and i cant figure out the flowrates... it will drain into my sump then get pumped back up...
Last edited:
