Water conditioners

What he said... ;)

There is one consideration which was mentioned to me by a local aquarist. Water conditioners that have gunk like aloe vera in them (here's my Stress Coat bash ;) ) can actually harm fish when added directly to the tank, but in a rather counter-intuitive manner. I used the term "gunk" on purpose, they're thick and gouey, you add it to your water as you're filling and a fish swimming underneath is hit by a gob that gets caught up in its gills and stresses out or potentially kills the fish. Meanwhile you're testing your water and trying to find out what killed the fish only to leave it as an unsolved mystery.

I'm not sure how likely or possible the above situation is. I did lose an Oto with no changes to water params. while I was using Stress Coat, but I'm not going to come out and blame the conditioner, it's merely a possibility.

I have, incidentally switched water conditioners to the cheaper Insto-Chlor, but that had nothing to do with the possible harm to fish of Stress Coat. Simply that a) our local water is Cl2 only, no chloramines, and b) I don't like the idea of adding something unnecessary (aloe vera) to my tank. Whether or not aloe has healing properties for fish I don't know (it's great on sunburns though), but why add something intended to heal an injury that isn't there? Not to mention the price.
 
I have used a python water changer for years with big, 50% water changes - I just add the conditioners to the tank as I refill - knock on wood, but I've never lost a fish after a water change or have seen signs of stress. If you are concerned, you can do smaller, more frequent changes.
 
I do as Happychem does, just add the cheapest stuff I can find that only takes care of what I need it to do. But from what I understand if you have chloramines Prime is fairly cheap to use.

The stuff works fast so it should not be a concern when using a python. And it is hard to overdose the stuff unless you really try.
 
Got me a python-like vacuum

After lots of considerations, I went ahead and made a DIY "python". I read up on some of the DIY posts, got the necessary parts, and put it all together. I was considering getting a real Python from the local Petco for $25 but decided to be a little adventurous. It cost me $16...waterbed filling/draining kit for $6 from Ace Hardware (comes with venturi pump, faucet fitting, and waterbed nozzle) and a 25ft. 'Marine & Camper' hose from Swan for $10 (USFDA-approved inner tube materials for food contact use).
 
AquariaCentral.com