4300 Gallon Plywood Build (3600+ Take 2)

[Rbishop]

Really hope it works this time....wanna see a room shot viewing the tank and a cold one in your hand...

 

[Fozzybear]

+1 and a big as all get out arowana behind you

 

[Nolapete]

Some pics from my friend Jack's and water at the 4' mark.

 

[Nolapete]

Have to go by Home Depot to get a couple more test caps and end caps for the upper bulkheads. Here's the water level now 15 inches from full.

 

[Fozzybear]

how's the weeping?

 

[Nolapete]

Just got back from Home Depot. About to cut the 2" ABS pieces for the top bulkheads, solvent weld those two in, then put the internal pipe and test caps in. After that, it's fill it up time!

Weeping is still about the same. Ken stopped by since he was in the area and agreed that it wasn't a big deal and something easily fixed before we permanent fill the tank.

 

[Nolapete]

11.5 inches from the top of the window.

 

[Fozzybear]

gha! so cool, looks great dude.

 

[Nolapete]

7" from the top of window. I started marking the time with masking tape at intervals and found that over 10 minutes it filled 1.25" which is 74.26 gallons.

 

[Nolapete]

Tank is full. Now we wait...