Multiple canister in/out placement 75g

[robbob2112]

I currently have a fluval 405 on my 75g cichlid tank and it isn't quite enough to keep it sparkling clean.

I tried the power head with quick filter and that gets all the water movement and clears it up because of the 50 micron filter, but it clutters the tank and requires frequent cleaning of the cloth.

With the 405 I have the inlet on the bottom left about 2 inches above the substrate. The outlet is on the top right so that it causes lots of surface agitation.

I have a marineland c-360 on order and once it arrives I was wondering how people normally place the inlet/outlet hoses for multiple canister filters?

 

[mott]

On my 55 I have two Eheim's at each end flowing towards the middle of the tank.

 

[Mgamer20o0]

i would have the outputs on both ends and the inputs even in back. so 1/3 input 2/3 input

 

[Rbishop]

:iagree:

 

[robbob2112]

i would have the outputs on both ends and the inputs even in back. so 1/3 input 2/3 input

Outputs at either end I get... what does "1/3 input 2/3rd input" mean?