I never started a thread of my pond build here. Pond in my siggy got as far as a hole with a liner then I filled it in and moved location and entire plan. So here are some pictures throughout the build, took a full summer with a little spring and fall to complete it. When at max water level system holds about 5,000 gallons. Used about 30 tons of rock and no machinery, all dug by hand and the biggest rocks were moved with slings made from underlayment.
Location and our shade structure
Colorized. Water is pumped from the pump vault to the waterfall and the bog, bog overflows into the main pond.
Stuff you never knew was there....
Put it in the hole! This is the water basin/pump vault area.
Initial waterfall hill, we made it wider later on.
Overview of progress. you can see the waterfal hill in the back, the basin behind the garage can and the initial outline of the pond with the burm leveled out. We made the pond bigger too. The straight lines of fresh dirt was where we ran new plumbing for yard hydrants and the auto top off for the pond, which is located in the basin.
Hole!
I don't know what the picture limit per post is so I will do this in groups of 10.
Location and our shade structure

Colorized. Water is pumped from the pump vault to the waterfall and the bog, bog overflows into the main pond.

Stuff you never knew was there....




Put it in the hole! This is the water basin/pump vault area.

Initial waterfall hill, we made it wider later on.

Overview of progress. you can see the waterfal hill in the back, the basin behind the garage can and the initial outline of the pond with the burm leveled out. We made the pond bigger too. The straight lines of fresh dirt was where we ran new plumbing for yard hydrants and the auto top off for the pond, which is located in the basin.

Hole!

I don't know what the picture limit per post is so I will do this in groups of 10.