Running DIY Co2 Through a c-160?

Yep, that'll work. I pulled my tube a little further up in it, but if you want to see the bubbles, you might leave it around there. Or you could put it in the bottom section, for a greater chance of seeing the bubbles.
 
I've not had a problem with that. The suction's not that strong. You'd have to have the tube sticking down into the mixture on your generator for that to happen, i imagine, and then you wouldn't get the gas anyhow. The gas separator is there as a safeguard. I personally have had nothing but gas go into the separator... never any kind of liquid from the generator.
 
yip that'll work.

I was just throwing in the l-bow to keep everything nice and tight, for asthetics. And for you to easily see bubbles. ;)
 
I should still be able to see if it's working inside the intake, right? (cause I wanna see a little bit of a bubble ;)

Edit: Thanks for all the ideas!
 
Or.....

If not. You could run the line down a couple of inches below the intake and let the natural curve(from being curled up in a bag) of the airline, curve under the intake.
You'll see bubbles come out of the line, then sucked into the intake.
 
You must log in or register to reply here.
AquariaCentral.com
Top Bottom