AmQuel+
I currently have AmQuel+ by Kordon (Novalek) that I use whenever I see that Ammonia may be present, which isn't occurring often at all. I use AquaSafe w/BioExtract by Tetra as a water conditioner and EasyBalance w/Nitraban by Tetra for further conditioning. When I do a water change, I put both the AquaSafe and EasyBalance into the water to treat it. Should I just stop the addingo of both of these and just use Prime? or AmQuel+?
- AmQuel+ is nontoxic and saves on the need for as many water changes
- AmQuel+ removes/detoxifies all of the kinds of toxic nitrogen compounds in the water
- AmQuel+ removes/detoxifies all forms of chloramines/ammonia/ammonium/nitrites/nitrates from the water
- AmQuel+ stability and reliability reduces the need for water quality tests of ammonia, nitrite, and nitrate
- AmQuel+ removes/detoxifies toxic pheromones from the water
- AmQuel+ does not affect the water's pH (acidity/alkalinity)
- AmQuel+ does not interfere with the beneficial nitrifying bacteria or their food sources
- AmQuel+ does not interfere with the beneficial sludge-removing bacteria or their food sources
- [FONT=Arial, Helvetica, sans-serif]Prime™ removes chlorine, chloramine and ammonia.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]Prime™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]Prime™ may be used during tank cycling to alleviate ammonia/nitrite toxicity.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]Prime™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]It will also detoxify any heavy metals found in the tap water at typical concentration levels.[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Prime™ also promotes the production and regeneration of the natural slime coat.[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Prime™ is non-acidic and will not impact pH.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]Prime™ will not overactivate skimmers.
[/FONT] - [FONT=Arial, Helvetica, sans-serif]Use at start-up and whenever adding or replacing water.[/FONT]
I currently have AmQuel+ by Kordon (Novalek) that I use whenever I see that Ammonia may be present, which isn't occurring often at all. I use AquaSafe w/BioExtract by Tetra as a water conditioner and EasyBalance w/Nitraban by Tetra for further conditioning. When I do a water change, I put both the AquaSafe and EasyBalance into the water to treat it. Should I just stop the addingo of both of these and just use Prime? or AmQuel+?