Again thank you for all the replies and I appologize for my responses. For some reason the actual thread is still not showing up in the forum section. I'm having to dig for it by searching.
Some added info. I have incorrectly cycled this tank before with this ammonia. The first time I just added in the ammonia only once. I did not keep on feeding it as it dropped. The tank was brought up to a level of 3-4ppm and I just left it. It did cycle; however, the NitrAte of 5ppm was not enough and was basically dead.
As of now the tank is:
PH 7.6-7.8
Ammonia 2-3ppm (never dropping below 2)
NitrIte 0
NitrAte 10ppm (due to tap water)
kh 140-180 (Petsmart readings)
gh 280-300 (Petsmart readins)
Temp 82-84 (Hoping to speed up process)
HOB filer which is providing some aeration, no airstone.
Amquel Plus water conditioner (Seems good/no smell).
Has been six weeks in cycling process.
Tank only has rock substrate, nothing else.
Light off due to algae (green flaky type)
API Test kit liquid (bottled in 07/still should be good)
Tap Water (From carbon active filer on faucet)
Ammonia 0ppm
NitrAte 10ppm
Ammonia is (Could not post pic, need to learn how) Goodwin's pure ammonia. Streak Free no rinsing. Non detergent. When shaking it, it does not foam up. I assume there are on addatives mixed in.
Hope this helps.
Thanks